MatterHackers' Mascot Phil A Ment

Introducing the new MatterHackers mascot: Phil A. Ment! Designed with troubleshooting in mind, Phil has several features specifically to put your printer through its paces. These features include: small inset details, small embossed details, overhangs, vertical and horizontal cylinders, fillets, chamfers, bridging, and even his perfectly domed helmet.

On a well calibrated 3D printer, this awesome little guy prints well at any scale; from 12 millimeters tall to 350!

Printed in MatterHackers PRO Series PLA at a 0.2mm layer height and 10% infill.
-https://www.matterhackers.com/store/c/PRO%20series%20PLA

If you have MatterControl, you can also find him in our Design Store to add him to your Cloud Library.
-https://www.matterhackers.com/store/l/matterhackers-mascot-phil-a-ment/sk/M6DV4FS2

Can you print any bigger than 350mm or smaller than 12mm? Share your make with us and we'll include you as a record holder!

Current Records:
-Smallest Phil: 5mm on the Peopoly Moai by Chris Lee (@chimpusmaximus on Twitter)
-Largest Phil: 1397mm on the Pulse HV and Lulzbot TAZ 6 with MOARstruder by MatterHackers

Designed by MatterHackers