IKEA Detolf glass shelf holder.
Please note there is left and right version. For one shelf you must print 2x left+2x right.
Cutout on the top is there to secure the position of the glass (glass must be the same size as the original). But you can also use it to stick some padding material there.
Each holder needs: 2x M3 nut, 1x M3x12 screw, 1x M3x13-14 screw
(or just buy M3x20 screws and cut them to lenght with Dremel tool :-)
Do not overtighten the screws.
Recommended print settings: No supports, infill 25-30%, 0.15mm layers
If you want to support my work you can send me a tip via Paypal
Or you can buy the print from users who have licensed my design: *ag (eBay)
Thank you :-) 
tomfrajman
