L96/MB01 suppressor adapter

STL FILE can be found here: https://www.prusaprinters.org/prints/137911-l96mb01-suppressor-adapter-airsoft

Why

My Well MB01 came with a 26mm CW threaded outer barrel, and while adapters to the more common 14mm CCW airsoft flash hiders do exist, they usually cost around 10-15 bucks+ shipping.

Features

• Pre-modeled threads. The thread pitch on the L96 side isn't perfect, but that does make it fit rather snugly.
• Fits my MB01, but should also fit the MB08 and other Maruzen clones. Possibly even the MB44 series.

Instructions

• Print it in PETG with multiple walls, slow speed and little cooling to get the strongest part.
• No supports required
• .2mm layer height is just fine.
• If it doesn't fit, your printer calibration may be off. Try printing it at 99 or 101% scale if this is the case.

Open Source

As always the original design file (fusion360) is included, so feel free to improve it (or learn from it)!