Two parts to hold down and mount the Ikea Koppla Multiple Socket Outlet.
You can choose between two versions! One will use less filament to print but will certainly fulfill your needs, too.
Instructions:
1) First screw down the part with the 2 holes UNDERNEATH the socket.
2) Add the socket
3) Add the part where the holes are at the end
4) Make sure to really push it to the end until the socket slides into the holder
5) Screw down the holder.
Notes:
- Make sure to use counter sunk bolts 3,5 mm. Otherwise you will have to customize the holes.
JayMake
