Customizable Remix of DJI Controller Tablet adapter, foldable

This is a remix of the tablet adapter introduced by itsnotlevel. This one is customizable for the size of your tablet/ phablet, and is foldable!

Besides the printed parts, you need

• 10x M3 x 20 screws
• 2x M3 x 30 screws

to put all pieces together. The figures show how to build up the adapter:

1. First, insert six M3 x 20 screws into the bottom and attach the spacers to them.
2. Exercise the movement of the spacers a few times.
3. Also, put the two pieces of the tab plate together using the two M3 x 30 screws
4. Put the tab plate on top of the spacers and fix it with the four remaining screws.

Using the customizer, you can create plates that fit your tablet/ phablet.