Bfight210 RunCam Micro Swift Camera Mount

This is a mount that attaches to the front frame spacers on the Bfight210 quadcopter frame. The included carbon fiber mounts are too wide for the RunCam Micro Swift. These help a Micro fit perfectly. The back side of the mounts were slimmed down because of the limited space between a mounted flight board and the spacers.

I printed 2 of these out of TPE (it's like TPU) with no supports on my Anet A8. I did print the adhesion plate but I don't know that it is really necessary.

The "v2" mount is a little thicker and the screw holes are a little less shallow allowing for longer mounting screws to be used.

The "v3" mount is a 5mm longer version of the "v2".

You can buy your own Bfight210 frame here:
https://www.banggood.com/Bfight210-210mm-Carbon-Fiber-FPV-Racing-X-Frame-4mm-Frame-Arm-p-1181906.html?p=6Z050013977120130325

Check out the BFight210 Top Plate with Shark Fin and AXII Holder:
https://www.thingiverse.com/thing:2790311

This is my first uploaded thing to thingiverse.