Milk frother (Milchaufschäumer)

Here's a simple milk frother.
I designed this because my old one has broken and I have a 3D-printer... ;-)

I used old parts. Switch and motor from electronics-scrap. The essay from a broken milk frother. The power supply is from my old WIFI-Access-Point.

Materials:

• Motor with diameter of 24mm and length of 30mm (RF-280 or similar)
• Switch (snap-in with dimensions of 19,2x12,9mm)
• Power supply with 5V or 6V and at least 500mA current (5V is easier to handle and 6V has more power; If you are unsure, I recommend the 5Volts)

After printing I have reworked the 4 holes with a 4mm drill.