October 11, 2017
Description
This is a case for the Raspberry Pi that screws directly to the Lulzbot TAZ 6 on the upper left-hand side of the machine using the existing screws. It faces all USB ports down and the Pi power plug to the rear to make wire management clean and easy. The heat-set inserts and screw together design make it very robust.
This enclosure should fit both the Raspberry Pi 3 and the Raspberry Pi 2. It has the SD cutout for removing the SD card with the Pi 3 friction slot.
This Pi is used with Octoprint print manager.
License:
Creative Commons - Attribution
ApertureEngineering
![NAS ITX PC Case with stackable expansions [MODCASE MASS] preview image](https://wsrv.3dprinterfiles.com/?url=https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/thumbs/cover/320x240/jpg/212.jpg&w=640&h=640&output=webp&q=100&n=40&default=https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/212.jpg "NAS ITX PC Case with stackable expansions [MODCASE MASS] preview image")
