SMD SMT Connectable Container

###SMD Connectable container

---

Print as many containers as you like and organize your SMD collection in a professional way.

###Print Settings
Before you print be sure you have proper bed levelling on your printer. Elephant foot will cause issues in the connectors. You also need to have your printer's flow/extruder multiplier calibrated properly. The nozzle should be extruding a perfect 0.4mm string. The walls are calculated to a 0.4mm nozzle. Also be sure your retraction settings are well tuned to have a calibrated priming start, possible issues miss start walls or oozing.
Don't rush printing, a minimal z wobble will affect connection.
If you can't connect the boxes, your flow is too high or you have elephant foot issue.

• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Infill: 20% linear
• Walls: 1.2mm or 3 perimeters
• Top/bottom: 0.8mm or 4 layers
• Print speed: 50mm/s ; outside wall: 30mm/s infill:30mm/s
• First Layer: 30mm/s

###Assemble:
The lid and the box can be joined together with a piece of filament as pin.
The first times is a bit ruff to open and close but after some tries it will close with a satisfying click. Use a screwdriver, finger nail, or your SMD too, under the tab to pop open the lid.