1/10 RC 4WD Buggy RB250

Buggy with fully printed chassis

If anyone is interested, I will make a full specification and I will make an assembly instruction.
At the moment in the development of the body case

  List of required details:
CVD ----------------------------------- 4 https://goo.gl/5WA1hL
Rear shock absorbers------------- 2 https://goo.gl/pmiiAj
Front shock absorber-------------- 2 https://goo.gl/UvwLSf
Wheels -------------------------------- 4 https://goo.gl/AUevML
Combo 3650 motor and ESC --- 1 https://goo.gl/ekA1Mx
Differentials ------------------------- 2 https://goo.gl/UxMdPW
Central gear ------------------------- 1 https://goo.gl/KA2Bgk
Diff pinion ---------------------------- 1 https://goo.gl/2EjKzk
Hex ------------------------------------ 4 https://goo.gl/91aktP
Servo --------------------------------- 1 https://goo.gl/eV1akz
End Ball------------------------------- 8 https://goo.gl/excR6u
Steering knuckle head ball ------ 8 https://goo.gl/CXNL8C
Central shaft ------------------------ 1 https://goo.gl/ZwhB6t

DIN 125 M3 ------------------------- 22
DIN 7991 - M3x10 ----------------- 23
DIN 7991 - M3x12 ----------------- 14
DIN 7991 - M3x16 ----------------- 5
DIN 7991 - M3x20 ----------------- 2
DIN 7991 - M3x8 ------------------ 31
DIN 912 M2.5x10 ----------------- 4
DIN 912 M2x10 ------------------- 8
DIN 912 M2x12 ------------------- 16
DIN 912 M3x16 ------------------- 6
DIN 912 M3x20 ------------------- 6
DIN 912 M3x25 ------------------- 2
DIN 985 - M3 ---------------------- 47
DIN 985 - M4 ---------------------- 4

Ball bearing 695ZZ -------------- 8
Ball bearing 678ZZ -------------- 8

About 750g ABS or Nylon ----- 1