Beautiful Robot Arm Spool Holder (RASH) for Kodama Trinus

Beautiful, strong Robot arm spool holder for any printer model.
You can easily adjust/change base plate for your printer or table by replacing "Trinus55Top.stl"

Need following parts

1. Bearings can be found at eBay or Amazon.
   2pcs R8-2RS Rubber Sealed Ball Bearing Bearings 1/2" x 1-1/8" x 5/16" inch

2. Need a 12~13mm Dia 150mm long wooden rod (you may print)

3. 6 pieces of 3mm x 12mm Metric Flat Head Socket Screw (Item 3 is for Kodama Trinus printer. If you have a different model, you don't need it.)

4. 4 pieces of 12-24 screws (or M6 x 20~25mm) or similar

5. 2 pieces of Dry wall screws (or M5 x 20mm) or similar

Most items are found at Home depot, Lowe's, Orchard or similar Hardware stores.
You can use similar screws and wooden stick. (screw size is not critical)