Cabinet Handle (Large)

Replacement handle for two door cabinet.

I salvaged a two door cabinet and needed a couple of handles for the doors. Since my fingers are not small and delicate, I took the opportunity to make some handles that are more suitable for fingers that are short and fat.

The handle has a 20mm X 20mm base and have 25mm of clearance under it. It is sized to fit mounting holes 95mm on centers. The mounting holes are 15mm deep and 3.5mm in diameter. This should fit 4mm self-tapping hardware.

It is a bigger handle, so it will hang out 35mm off the door on the outside.

Print as many as you need!