Anet A8 Direct Feed E3D Carriage Mount

This product & many more can be brought via our website at www.cobratronic.com

Anet Direct Feed E3D Carriage Mount

Motor mounted 90 degrees offset on X axis which gives easy front access to filament feeder
Motor weight centrally mounted directly above bearings
Heatsink fan mounted behind cooling fins to give improved vision
Side mounted Hotend fan to give improved hotend vision
Additional mounting points for bed sensor brackets
Mounting points for Black Semi Enclosed Drag Chain Carrier 10mm x 10mm.
Tidy Cable direction management

Before you ask yes built in PLA. Print PETG and ABS with no problem. If this mount gets that hot then you need to switch on your heat sink fan as the mounting area should always be cold unless you like blocked filament feed cold areas

Built for use with additional parts

E3D clone hotend
https://www.amazon.co.uk/Finlon-Hotend-Extruder-Printer-Filament/dp/B0734MR3JR/ref=sr_1_1?rps=1&ie=UTF8&qid=1508671763&sr=8-1&keywords=e3d+v6&refinements=p_76%3A419158031

3D Printer MK8 Remote Extruder Right Hand
https://www.amazon.co.uk/Extruder-Accessories-Filament-Aluminum-Accessory/dp/B073YB25YV/ref=sr_1_8?s=industrial&ie=UTF8&qid=1508671519&sr=1-8&keywords=3D+Printer+MK8+Remote+Extruder

Heat sink Cooling Fan
https://www.amazon.co.uk/gp/product/B018GFH6XO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Black Semi Enclosed Drag Chain Carrier 10mm x 10mm
https://www.amazon.co.uk/gp/product/B008IBKSDW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Printer: Anet A8
Material: PLA
Extruder Temp: 195
Bed Temp: 60
Resolution: 0.2
Infill: 40%
Cooling: Yes, start at layer 4
Rafts: No
Supports: Yes
Support Type: Build platform Only
Support Infill:30%
Dense Infil: 60%
Horizontal Offset: 0.25
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Anet E3D Carriage Clamp

Use two M4 Socket Head Cap Screws

Printer: Anet A8
Material: PLA
Extruder Temp: 195
Bed Temp: 60
Resolution: 0.2
Infill: 50%
Cooling: Yes, start at Level 4
Rafts: No
Supports: No

X Axis Cable Tray Mount

Made from PLA to fit Black Semi Enclosed Drag Chain Carrier 10mm x 10mm.
Mounts to X Axis motor and includes Z axis end stop adjuster
Mounting holes for 10mm x 10mm Drag Chain Carrier
Holes for cable tie attachment

https://www.amazon.co.uk/gp/product/B008IBKSDW/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Printer: Anet A8
Material: PLA
Extruder Temp: 195
Bed Temp: 60
Resolution: 0.2
Infill: 35%
Cooling: Yes, start at Level 4
Rafts: No
Supports: Yes.
Support Type: Normal
Support Infill:30%
Dense Infil: 60%
Horizontal Offset:0.25
Upper Vertical Separation Layers:1
Lower Vertical Separation Layers:1

**Z End Stop Micro Switch Bracket **

Taken from : https://www.thingiverse.com/thing:2050229/