November 6, 2017
Description
I got a balancer shaft from Kavan for small money but haven't had a proper stand for it. Because I also had some small magnets laying around, I designed this propeller balancer and wanted to share it with you.
All you need for this propeller balancer is some metal balancing shaft of 70 mm in length and with a tip less than 3 mm.
Furthermore, you need two cylindrical magnets of 8 mm in diameter and 3 mm in height.
Print this balancer stand and the inserts as it suits your printer best, put the magnets in and fixate them with the inserts. If stringing occurred, cut it off and clean the stand thoroughly to avoid the balancer shaft of being somehow influenced or hindered from rotating freely.
If you already have all the necessary party, great!
If you need them, here is a bill of material for you (affiliate links ahead!). Use it for orientation, or if you want to support me, please consider a purchase.
I have also uploaded the Fusion 360 file so you can make adjustments to this design as desired. However, please respect the licensing!
Your opinion on this design and suggestions to make it even better is appreciated
Please also take a look at my other designs, printer parts, and tools.
If you like to support me and my work, please consider following me on:
Sending a tip over Thingiverse is much appreciated and will provide me with coffee to stay productive.
Please also consider buying your next gear via one of the affiliate links found inside my Thingiverse project pages or directly over the following links.
License:
Creative Commons - Attribution - Non-Commercial
MartinMajewski
