Photon Engraver - Mounting plate for microswitch endstop

Mounting plate for 13mm width microswitch for common DVD chassis type to use with Isolt's Photon Laser Engraver ( https://www.thingiverse.com/thing:902826 ) or any other CNC type assembly using these drives. Mounting holes are m2 with 47mm spacing.

Here are the .STL files for a few parts I modified while I was building the Photon which may be of use to someone :
The external width of my engraver was 130mm so I've increased the width of the door and cover strips to suit, and extended the lower vent downwards so the bottom coroplast slides up to it flat.
With the DVD chassis I used I found that the V mount put the laser too far forward. I've reduced the depth of this to move it back, and also included a flat plate for a block heatsink mounted laser.
I left out the additional 12V socket and power switch so printed blanking plates for the holes.
I've included a clip which attaches to the LHS sideplate for this laser driver :https://tinyurl.com/ycgch9ra