Shore Trooper Helmet V2 (Sean Fields) Split to fit 200x200 build plate

This is the V2 version of SeanKFields Shore Trooper helmet. All credit for this model goes to him I merely chopped the files to fit my bed. The original files (including the armour) can be downloaded directly from http://shoretrooper.co.uk I only had to chop 6 files in the end.

I have left the original sized pieces intact and added A and B options which are the bits I needed to split. The face will fit on the bed but I found it easier printing these split up and then gluing back together. I did put a registration tab on the rear rim but after printing a few of my chopped bits it wasn't necessary so left the rest.

Update 28/3/19:
Started printing another for a AT ACT driver helmet and wanted to print the front cap in one piece so combined it. It saves some gluing, filling and sanding. 0608_-_combined_cap_front.stl

Update: Added a Kyber trooper to the collection. Fan fiction so took some guesses with the colours: Montanas black - mermaid, white, black; Montanas gold - Red orange

If you want to see more of the build process:
https://imgur.com/gallery/Ea5jt
https://imgur.com/gallery/uP80a