Functional Smoke/Gas Mask Respirator

Great mini gas and smoke respirator that fits in your pocket great for emergency and men with beards!
There are lots of pictures to show you the way the filters are prepared (NO GLUE OR SCREWS REQUIRED) NOTE! There are 2 types of adapters to choose from Flush fit or Extended.

Items Required:
1 X 6mm Airsoft BB
Activated Charcoal (For Gas or Air Filters)
Cotton Makeup Removal Pads
Electric Tape

Instructions:

1. print all the parts once ( Filter pieces X 2 each)
2. Insert a 6mm Airsoft ball in the one way valve hole in the main body.
3. Press the one way valve cover to the main body.
4. Fill filter, 1st layer Cotton Makeup Pad, 2nd layer Activated Charcoal, 3rd layer Cotton Makeup Pads X 2.
5. Wrap the filter Top with electric tape to get an air tight seal then Press the Top & Bottom together, make 2 sets.
6. Press the 2 filters to the Adapters.
7. Attach the filters to the main body when in use and make sure the one way valve is facing UP!.
   !!!For Emergency Use Only!!!
   Version 2 is out https://www.thingiverse.com/thing:2645635

!New update coming soon, filter housing for the following filters below:
https://www.ebay.co.uk/itm/10Pcs-5N11-N95-Particulate-Filter-Respirator-Cotton-Gas-Mask-6200-6800-7502/201914499346?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

https://www.ebay.co.uk/itm/10pcs-5-packs-3M-2091-particulate-filter-P100-for-6000-7000-series-respirator/272204476147?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
ADDED 3M P100 FILTER ADAPTORS

V1: https://www.thingiverse.com/thing:2638406
V2: https://www.thingiverse.com/thing:2645635
V3: https://www.thingiverse.com/thing:2745144
V4: https://www.thingiverse.com/thing:2763688
V5: https://www.thingiverse.com/thing:2772315
V6: https://www.thingiverse.com/thing:3186997

!Don't forget to check out my other designs and Follow my weekly KooKoo uploads, Enjoy ;)