November 11, 2017
Description
I needed a spool holder for my dual extruder printer. The spools were taking too much room on table. I removed the printer panel and mounted it on the side of the printer (Project coming soon) to allow mounting the spool on top. The fit is tight, I had to hammer it into place from below with a rubber hammer. There are 2 screws holding it from moving or sliding. The install is very solid and holds 2 spools of 1kg each without a hitch.
This is the printer https://www.amazon.com/Geeetech-Unassembled-Prusa-extruder-printer/dp/B06XHYBY6Y/ref=as_li_ss_tl?s=industrial&ie=UTF8&qid=1510441023&sr=1-1&keywords=Geeetech+I3+Pro+C&linkCode=sl1&tag=2ooki-20&linkId=eaa55894981a63badca5702725ebc951
and the Filament I used https://www.amazon.com/Geeetech-Unassembled-Prusa-extruder-printer/dp/B06XHYBY6Y/ref=as_li_ss_tl?s=industrial&ie=UTF8&qid=1510441023&sr=1-1&keywords=Geeetech+I3+Pro+C&linkCode=sl1&tag=2ooki-20&linkId=eaa55894981a63badca5702725ebc951
License:
Creative Commons - Attribution
10,968
Ep3d
