"Spring" Assist Quick Clamp

*Edit2: I added the top piece for the table, got around to making it and then making it compatible with the rest of the clamp. p3 is the last bit of the file name and it likely has to be printed around .16 or so resolution cause it has the threads for the rest of the clamp to connect to. Again if you print this i would love feedback as i haven't gotten around to printing it yet.

*Edit1: i think i got rid of the errors and added the files separate according to quality needed, p1 should be printed at around .18 or smaller, and p2 doesn't really matter, .3 will work but it needs supports. I will work on an alternate to make the clamp useful for other applications as well, likely just be the C shaped properly lol

Made this mostly from scratch in 3D builder and used some of my old designs/remixes to fasten it together, in theory. I haven't printed this. Its for a table top pool que holder for now but i am sure i can design a better one that will work for other uses in the future. As you can see in the picture i assembled everything in the Builder to give you a visual for assembly, if you cant figure it out, ask anything you want in the comments cause others may have the same issues.

The idea is to push the bottom up to clamp it to the table and slide the oval side to side to lock/unlock the threads. I am thinking something like that tacky shelf liner to add to the two surfaces that meet the table.