Anycubic Kossel Controller Box

##Anycubic Kossel Controller Box
This upgrade is designed to provide better cooling to the electronics by changing the mainboard's location. Furthermore, it mounts up to two MOSFET modules.

I designed this upgrade together with the PSU Box, which you can find here.

###Why Did I Design This?
Especially when the Delta uses a heated bed, the electronics operate in a warmer environment. To avoid overheating and to mount the PSU when adding a heated bed, I chose to design a case for each of them and mount them on the back extrusion.

###Features

• Can be mounted in two distinct ways (see below).
• Mounts the TriGorilla mainboard with access to both plugs.
• Dimensions: 169x138x62 (depends on how it's mounted...).
• Up to two MOSFET modules can be mounted.
• Easily printable on the normal Anycubic Kossel without supports.
• Stepper driver cooling with the help of the "Stepper Motor Aero Tunnel" by Facocero, which can be found here. However, my included fan adapter is necessary!

EDIT: This case is featured in my Anycubic Kossel Upgrades Video.

EDIT 2: I've published another version of this case. Its height is reduced by 40mm, but it doesn't mount any MOSFET modules!

EDIT 3: 3D_PP designed an adaptor for an MKS MOSFET.

####See below for a detailed installation guide!

Have fun with this model!