Ceiling Hook

This is a two-piece ceiling hook assembly. Mount the anchor with a screw through the center hole, and then push on the hook, and twist 90 degrees to lock it into place. A small line on the anchor shows which way the hook will point.

This hook was designed for use with a drywall/plaster anchor, although you could also screw it directly to a joist. Or anything else, really. The hole and cavities are sized for a No.8-12 screw, but should fit larger screws as well.

Toleranced for a Replicator 2. See print instructions for details. The hook_stronger variant is thicker. Designed in Autodesk Fusion 360, with some manipulation in Autodesk meshmixer.