Spektrum FPV Monitor Mount

This is for Spektrum DX6, DX7 and DX8 (and other Spektrum models with the same antenna).
It clamps onto the 2 grooves around the antenna which provides an extremely strong and stable attachment.

The monitor should have the 45mm long slot at the rear, which the mount slides into.

Parts needed:

• 1/4-20 UNC A2 countersunk screw (3/8" - 1/2" long) to secure the monitor to the mount.
• 2 x 20mm M3 screws and 2 nuts. (If you use longer screws, you will need to drill the hole deeper.)

You can print both pieces together if you use the bigger .stl file (118kb).
(The 2 pieces are separated by a 0.5mm gap)

I added an optional neck strap balancer (because the original mount is too far away from the CG when the FPV monitor is attached).
For the neck strap balancer, you need 2 x 15mm M3 screws and nuts.