December 3, 2017
Description
Lampshade designed with a 0.4mm layer thickness for a print with a thickness of 1 layer filament. Print with a high fan speed. I used a (Innofil3d premium filament) creamy white PLA and 75% fan speed. You can use a normal lamp fitting with E27 40mm outer thread. This was about the maximum size my printer can print, and the print takes about 5 hours on my printer.
Only use LED lamps within this shade to prevent it from melting!
Cura settings;
Horizontal expansion : 0.4mm
Print thin walls; Enabled
Spiralize outer contour; Enabled
Surface mode: normal
License:
Creative Commons - Attribution
pipo1000
