Ferret Trinket

I came across u/lumpytuna's laser-cut ferret pendant on Reddit and thought, "I could print that!" So I did.

Just in time for holiday decor and gift giving season.

(With permission) I made this version by re-tracing the image in u/lumpytuna's post as a vector, then extruded the two colors proportionally for printing. For the best results at any scale, I ended up with three slightly different versions with varying amounts of detail in the face. All are roughly 100mm tall by default.

• The simple version (Simple_Ferret.stl) is ideal for printing at any scale, big or small, and recommended for most cases.
• The medium version (Medium_Ferret.stl) is similar to the previous, but with more geometry in the eyes and mouth.
• The detailed version (Detailed_Ferret.stl) is closest to the original laser-cut design, but unless you have a very small nozzle (<0.3) OR intend to scale it up greater than 150%, the face may turn messy.

u/lumpytuna's original ferret pendant necklace can be found here: https://obscenerie.com/collections/the-menagerie/products/ferret-pendant