Makita PW5001C wet stone polisher shroud

This is a shroud for the Makita PW5001C wet stone polisher. I am attempting to use a shop vac to vacuum up the water from the polisher, to reduce mess/cleanup. Ideally this would work well enough to use indoors. This is a partial success. The TPU was too stiff and didn't make good enough contact with the cement. The shop vac attached not tight enough.

Printed in TPU.

Didn't end up working well enough, ended up not using the shopvac attachment. Need to make two adjustments.

Thinner walls for longer perhaps one perimeter thick.
ShopVac attachment perhaps should twist-lock onto the Shroud.