December 13, 2017
Description
This is a hairy type Christmas Tree and accompanying ornaments, designed to be printable at near the maximum size of the Rostock Max V2. The tree itself is 11.25" (286mm) tall, by 9.85" Ø (250mm).
The tree is designed for PLA with a 0.4mm nozzle printed at 0.3mm layer height. If other settings are used the quality may suffer due to the loops of the branches not generating properly.
The ornaments are designed to be printed on any printer capable of single or dual-color extrusion, and in the case of the snowman, tri-color. Ornaments such as the Christmas lights and bell could also achieve the multi-color effect via a layer pause and filament swap.
The ornaments all include a built in hook which will attach to the loops of any hairy type Christmas tree, the Christmas lights are designed for the first and last light to loop inside the tree "branch" to hold in place.
Any file with the suffix "A" "B" or "C" is designed for multi-color, any without a suffix is intended for single color extrusion.
Files designed for ONLY single color:
Files designed for 1-2 colors:
Files designed for 1-3 Colors (highly recommended as 3)
For my print all ornaments were printed on a Prusa MK2 Multi-Material Kit. The tree was printed on a Rostock Max V2. The small "presents" are the wipe blocks used on the multicolor prints on the Prusa MK2MM.
License:
Creative Commons - Attribution
Cutlass
