TUSH stand long

I liked alot the TUSH (https://www.thingiverse.com/thing:2047554) but had the issue that the two holder parts slipped away, when trying to put the spool on top, since I use the filament spools in a big Ikea pastic box.
So I decided to design my own stands, simple and useful as the TUSH itself.

I attached two small anti slip pads per stand part, since using only the stands did not help much about the sliding itself, but now the spool holder stays in place and keeps its distance for my filament spool.

I am using a spool roll with about 63mm width, the inner width of the stand is about 48mm which gives enough space for the sppol to fit. The width of the TUSH is about 14mm in my case, which fits very well in the stand. It sligthly slides, but with the weight of the spool and the help of the stand, the TUSH does not slip away. In any case, it could be possible to put a small piece of double-faced tape between the TUSH with the stand. In my case I do not need to do that for now.