Speed Boat

New Update: I have added the raw design without the holders of motors and the feedings of the Shafts for those who like to have their own mechanical design after print.

This is one of my first tests on my new 3D printer (CR 10S). The boat main part was printed as one piece with a height of ~ 390 mm.
The print settings of the body can be found in the txt file.
The motors, transmitter and receiver were taken from an old BIG-one Helicopter.
I printed the flat cover only.
I used PLA filament for all parts except the sealing which was printed using FlexPLA filament.

I used 20% fill for the boat body and 100% for the propeller and sealing

If you have any enquiries, I will be happy to answer you.
If you have a suggestion of other practical components of this design, I may do them.

Enjoy the Thing!