Here comes my lithophane miniature lamp!
This one is designed to attach a switch and a light source. In case you want it without the switch let me know in the comments.
Instructions:
- Use the attached JPEG as an original for the correct dimensions of the lithophane.
- Change the image to whatever you like (keep the format!)
- Go to http://3dp.rocks/lithophane/
- Upload your image
- Select "Outer Curve"
- Go to settings > Model settings > Maximum size (MM) > Set it to 300 mm
- Go to settings > Model settings > Curve > Set it to 360
- In case you did not upload a negative image: Go to settings > Image settings > positive image
- Click "Model" on top of the page
- Hit "Refresh" button
- Hit "Download" button to download and print your personal lithophane
Printing:
- I recommend printing the parts orientated as they are downloaded
- don't forget the supports when printing your top_plate
Selecting the light source:
- Take the "adapter_piece" File (Sldprt or STL) and modifiy it so you can attach your own light source.
- The adapter piece is designed to fit on the 3 holes on top of the litho_mount-plate
- you can use the abatements to drill your own holes in the adapter piece
Switch:
- Dimensions: 21x15 mm
- Contact me if you need help finding the correct switch
LET ME KNOW,
IF YOU MADE ONE ;-)
JayMake
