January 1, 2018
Description
A mount for the E3D v6 plus the BLTouch plus a 40mm part cooling fan.
remixed from a couple of other things...
Note: this will move the hotend forward by about 15mm which does interfere with the travel limits of the y axis. You will loose about 10mm of print area at the back of the bed.
This is easily fixed by loosening the T nuts and sliding the vertical sections of the frame back by about 25mm (i moved it this far as i believe the design of the x3 the uprights are too far forward anyway). This will require drilling 2 new 5mm holes for the bolts that go into the base of the uprights from under the printer.
License:
Creative Commons - Attribution
15,658
roycruse
