January 12, 2018
Description
The Doorman is a project to greet your visitors!
When motion is present, the eyes will open to look around.
https://www.youtube.com/watch?v=0KN21dYqdII
What you'll need to build this:
1x Arduino
5 x Servo
5 x capacitor 3300 µf
1 x batterypack ( 4AA )
1 x PIR sensor
2 x 3mm Universal Joint
I used Pattex glue to put it all together and acrylic paste to fill up anything that needed be filled up.
Not the easiest project but a lot of fun!
Note: not everything might fit together perfect and some tweaking will be needed.
The eye mechanism was found here ( forgot the eyelids, but they're in here ): http://www.instructables.com/id/3D-Printed-Animatronic-Eye-Mechanism-on-the-Cheap/?utm_source=newsletter&utm_medium=email
Code: https://create.arduino.cc/editor/tjahzi/74173f51-1325-41c1-aaee-e1da77bb72fc/preview
( Affiliate ) Links:
http://amzn.to/2FKmRsP | servo
http://amzn.to/2FGWBzs | joint
http://amzn.to/2E0Byr6 | battery
http://amzn.to/2FFCe5u | pir sensor
http://amzn.to/2FFCMs4 | arduino
note: this is the stuff I used. Depending on the manufacturer there may be some differences in dimensions which you need to take into account when printing.
FEATURED BONUS: https://imgur.com/gallery/1ER6k
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
Tjahzi
