Creality CR-10 Z axis cable drag chain

New: Combo YZ bracket when using both this and https://www.thingiverse.com/thing:2708420

Drag chain assembly for CR-10 to manage cabling from the X carriage (hotend, X motor and end-stop, extruder motor) so that it doesn't just hang freely. Works only with cable extensions, especially the hot-end cable assembly with the aviation plug.

Requires:

• 3x t-bolt hammer slot nuts + bolts
• 1x M5 50 mm bolt (can reuse the nut from the current wheel bolt assembly)
• zip ties to hold cable to top and bottom brackets.

Chain links are wider than those used for my Y axis cable chain (https://www.thingiverse.com/thing:2708420)

Top bracket:
There are 2 versions.
The version with cutout is needed for printers without a stepper dampener installed
The version without cutout is suitable for printers with stepper dampener installed.

Print:
10x bottom links (100% infill)
10x top links (100% infill)
1x top bracket (100% infill)
1x bottom bracket (100% infill)