Adjustable webcam mount for IKEA lack enclosure

Had a webcam lying around I wasn't using so making its permanent home a part of the OctoPi set up in the Ikea lack enclosure for my Maker Select V2. Because of where the printer is in the back room, I'll only have access from the front so wanted something that could fold up out of the way and over the Z-braces (hindsight from doing the forward mounted Z-braces).

Uses M3 screws to hold together. Note that a couple holes have a slightly larger diameter to accommodate M3 nuts vs the bolt head. Hinge 1&2 use a 2mm piano wire to hold in place.

See this thing in action: https://imgur.com/MTQht5X