Star Trek Bolivar class cut to print

This is a cut and ready to print version of outcastrc's Star Trek Bolivar class 1:2000 (https://www.thingiverse.com/thing:2140965). I have printed the ship at 250% using cura and that puts it in near perfect scale with Polar Lights 1/1000 Enterprise refit, see the pictures for reference. No support was needed for the vertical saucer halves, I doubt the horizontal saucer halves need it either. I used primer filler for the saucer and I lost some detail but it was so fine, you would be unlikely to avoid losing it without printing at a much larger scale. It you have a CR-10 S5, you can try printing th ship at 1/350 scale, I bet that would sharpen the detail.
Be very patient when gluing the nacelle and hull onto the saucer, I used epoxy resin so I would have time to position the pieces as straight as possible. I would be careful with super glue.

Remember 250% for 1/1000 scale. The saucer should be 143mm-144mm wide.