DAN A4-SFX GPU Spacer

GPU spacer for the DAN A4-SFX case to fit some thicker GPUs like the MSI GeForce GTX 1080 Ti Gaming X 11G

V1 has to be glued to the sidepanel
V2 with door clips for the Lian Li pins
V3 better mounting mechanism
V4 (planned) will probably be with some attachment for RGB strips

I've included a split-in-half version for smaller printers. If you need even smaller pieces feel free to contact me.

Update:
V2 is up! I've incorporated the door clip design from CarbonVirus (https://www.thingiverse.com/thing:2204133). No more glue neccessary!

Update:
Mirrored version for CPU side is now included.

Update:
V3 is up! I've completely redesigned the mounting hardware. You have to remove the little plastic inserts the DAN case uses to hold the pins of the original side panels. The new clips directly mount the spacer to the frame of the case. Clips are printed separately (sideways to improve rigidity) and are then press fitted into the spacer. I would recommend to use PETG or something more flexible than PLA to improve part strength of the clips even more.
I also took inspiration from the remix (https://www.thingiverse.com/thing:3583862) and reduced the material cost a little bit.

Update:
V3 fits like a glove! Printed the spacer out of PLA and the clips with PETG (see picture). Clips seem to hold up pretty good so far.
Moved all older versions to archive.

Update:
Uploaded 12 and 15 mm variants. (not tested by myself)

!!! MIRROR IN SLICER FOR CPU SIDE !!!

I'm currently not planning to make more alterations or adjustments since my DAN is no longer in my possession.