Hopper car body, for Marklin hobby range car chassis

Hopper body for H0 scale model railroad car. Compatible with Marklin/Trix hobby range of car chassis, as well as the printable chassis I made before.

This is a purely imaginary car roughly based on the 4-axle grain hoppers that are available as a model. I made this shape because it is not commercially available for this type of chassis.

2 versions have been included:

• one with the snap joint to mount on an original Marklin system chassis. This is more difficult to print.
• one with a flat bottom, intended for screw mounting or glueing. easier to print. matches the chassis I designed

Use 2mmx5 self tapping screws with large collar (recommended) or M2x5mm size screws for mounting.

5 cavities for M6 size nuts are provided to be able to add additional weight.

Picture shows it with my chassis, check my other things to get it as well! Only the grey colored part is included here. I added an assembled 3D model for use in thingyviewer, this one is not for printing.