Summary

This mount has a minimum amount of metal for the ED Fong DBJ-1 VHF/UHF antenna found on ebay. 2 are required for the antenna.

I designed it to mount on the side edge of the roof, and for any roof pitch. The mount is 3.5" in diameter so it will also fit on a standard 2X4, if the mount must be extended from the roof.

This mount was designed to fit "PVC-1120 SDR-21 PR200 PSI" 3/4" pipe which is specified in the inventors instructions.

I made mine using PLA and color matched it to the house.

Print Settings

Printer Brand:

FlashForge

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Creator Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.17</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>On my printer, each mount side takes about 2.5 hours to print.</p></div>

How I Designed This

123D

Antenna Mount

Antenna Mount

Related Models