K40 adjustable laser table

Hi,

this is an adjustable laser table for the K40 or any other laser.

I bought this one, but it was crap, so I redesigned it. You can also find it on amazon or ebay.

https://de.aliexpress.com/item/Laboratory-Equipment-200x200x280mm-Lab-Jack-stainless-steel-Raising-Platform-Lifting-Table-8-inch/1975144442.html?spm=a2g0x.search0104.3.100.6b3f62fcNsYR2o&ws_ab_test=searchweb0_0,searchweb201602_5_10320_10152_10321_10065_10151_10344_10068_10342_10547_10343_10322_10340_10548_10341_10193_10194_10084_10083_10618_10304_10307_10302_5711211_10180_5722312_10313_10059_10184_10534_100031_10319_10103_10624_10623_10622_10186_10621_10620_10142,searchweb201603_1,ppcSwitch_3&algo_expid=a3157612-e734-4e39-b0d0-c34db39b16af-15&algo_pvid=a3157612-e734-4e39-b0d0-c34db39b16af&priceBeautifyAB=0

The red parts are printed.
The blue parts are a thread rod with 8mm, cut in pieces.
The grey parts are original parts.
The yellow parts are self-locking nuts in 5 and 8mm, i recommend them.

You need 8 bearings 8x22x7mm ( 608 zz)
You have to drill 4 holes with 8mm to fit for the rod.

I added the drawing of the Original Parts, so you can build it without buying it.