February 10, 2018
Description
Yet another dust filter case from my own design.
After some ideas from a fellow thingiverse member, I tried to design my own dust filter for my Ender 2 printer.
This 2 parts prints together in one shot thus provide an inner joints. You may need to adjust you printer setting. For me, I found out that below setting is sufficient enough:
Nozzle heat: 190 degree
Bed Initial: 50
Bed: 0
Flow: 100%
Density: 80%
Print speed: 40 or 50
Printing time Approx: 1h 23m
Feel free to try it out and let me know your results.
License:
Creative Commons - Attribution
azamkl
