February 10, 2018
Description
This is an actuator designed for use with a motion simulator. With the 1610 ballscrew @24 volts and the recommended motor this actuator should be capable of unloaded speeds in excess of 900mm per second. It is meant for use with the
Ampflow e30-150 motor http://ampflow.com/three_inch_high_performance_motors.htm
1605/1610 x550 ballscrew https://www.ebay.com/sch/i.html?_odkw=ballscrew+1605&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xballscrew+1605+550.TRS1&_nkw=ballscrew+1605+550&_sacat=0
Two pieces of 20x60x500 vslot extruded aluminum from openbuilds http://openbuildspartstore.com/v-slot-20x60-linear-rail/
The linear bearing is from IGUS part #GFL-25 https://www.igus.com/product/?artnr=GFL-25
the shaft coupler is 30x42 with 10mm x 12.7 mm bore
The carrier assembly for use with this actuator can be found here: https://www.thingiverse.com/thing:2781279
THIS PROJECT IS A WIP
more info on this projects progress can be found here: https://www.xsimulator.net/community/threads/6dof-racing-platform-12v-dc-3-6kw-arduino-and-mm-smc3.8479/page-8#post-149821
2/27/18
added coupling spacer
3/3/18
added motor Base Plate
an encoder ( https://www.usdigital.com/products/encoders/incremental/rotary/kit/E2 part number E2-50-375-IE-D-G-3) has been added to the motor.
I am controlling it with a kangaroo, sabertooth 2x60 from dimension engineering ( https://www.dimensionengineering.com/ ) and
Simtools motion software ( https://simtools.us/ ).
the next update will include mounting options
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
Brucestephen
