Droid Restraining Bolt Arriflex Lens

This is a model replica of a restraining bolt that we commonly see on droids from a galaxy far, far away. :)

The domed bolt top has been modelled into the model. You can always grind it off if you want to use a real bolt to secure it to your object.

*Edit: the V2 version now has a centred 5mm hole, 30mm deep into the bottom of the bolt. This makes it easier to insert a drill bit or metal rod into the restraining bolt and will allow you to spin in on a drill and enable quick sanding / smoothing of any print lines from the surface by simply holding your sandpaper against the object as it spins. I suggest starting with 220 grit, then 400 grit and then using Duplicolor filler primer. Sand and prime again, repeat if needed.