CR-10 / Tronxy Mittens Cooler

Let's keep it cool! My take on a better cooler for the CR-10 Tronxy X1/3 type hotend. The stock CR-10 set up can cool the heater block too much if you don't have it wrapped. The parts doesn't cool all sides well. My Tronxy X3 didn't have a parts cooler and the heater block couldn't get temps over 205C. I tried a couple other popular coolers but did not fit my original parts blower or just not that efficient. So the Mittens Cooler evolved. Printed in PETG, it weighs 12 grams. Has a bit fo a twist for a little vortex of air. Needs a few things: a 5015 blower/fan, a few screws, a bit of rewiring, and a bit of tenacity. **Reportedly [works with the Tevo Tornado](https://www.thingiverse.com/make:456819) now.** *WARNING:* It works for me. Your results may vary wildly. I've gone through dozens and dozens of printed revisions to get to this version. *If you find this useful and want to encourage my insanity, buy a [cup of coffee](https://www.paypal.me/idig3d/3) for me, a [bag of coffee,](https://www.paypal.me/idig3d/8) or you [pick the value](https://www.paypal.me/idig3d). Thanks!* Please note, this is not compatible with the auto-leveling sensor. Send me one and I'll try to make one fit.