9G Servo Lateral Mount HXT900 / stop gluing your servos :-)

I got again an EPO model where the servos are to glue in the EPO foam. On the first plane the yaw rudder servo was killed after the first flight. No fun at all to change a glued servo.

For this model and all the others :-) I decided to create a case which is glued in the foam. The servo then is fixed with a topplate and 2 screws.

The case is symmetrical and has two cable ducts so that the servo can be mounted in both directions.

The dimensions were taken from a HXT900 servo. Due to the opened cable duct down to the bottom also 9g servos with their cables at the bottom should fit.