Individual Resistor Tray

I needed some resistor trays for a little project I was building, the item I used fitted the bill - almost. I didn't need the drawer unit but I DID need to stop everything falling out; a lid was definitely in order.

Cheers https://www.thingiverse.com/tesa97 for the starting point.

Here it is, it's a rough go in Fusion 360 and hopefully it works!

Edit:
Tried it as a hinged lid - nope, working out the position of the hinge point wasn't worth the effort. Extending a hinge out the back of the box? Not interested, I wanted it to retain the same external dimensions as much as possible.

Aha! A sliding lid is certainly the way to go! Thanks https://www.thingiverse.com/Area51

Re-imported the original base into Fusion 360 and sketched up the rest in there!

Will print and post as soon as I can - and sort any issues!

Yay.

Edit: V2 of lid created, clearances weren't practical (tight as a gnat's chuff would be an understatement).

Reprinting the lid with the existing base file to see if more adjustments are required.

Final(?) Edit:
v2 Lid is too loose in v2 base, Lid is now at v3 (returned to original thickness but with width reduced).

Let me know if it fits & I can re-edit if required.