AM6 AM8 - Aluminium Extusion case for Ramps 1.4 and 2 MOSFET - UPDATE is comming! (with Raspberry Slot)

UPDATE 12.09.2018:

Unfortunately there are still some improvements to make in the final and new version of "this" case. Just in this moment I am at the design of the Raspberry Pi camera mount, which can be installed at the back of the case.
If you wish features which shall be included, feel free to comment on this thing.
New things in the upcoming version:

• Removable mounts for your PCBs, incl. Ramps, dual Mosfet, Raspberry Pi, DIY TL-Smoother or other PCBs you would like to add

• integrated 40mm fanmount

• installable Raspberri Pi camera mount with LED light (you'll need 4x 3mm LEDs (3.5V 0.02A), 2x 270Ohm resistors + cables)

• (Progress is shown on the last picture) -

---

Still in progress

AM6/AM8 case for Ramps 1.4 and Dual-MOSFET
Including a cover with 40mm fan mount for stepper drivers.

UPDATE 07.05.18:
Sorry for the delay!
As I am in the modifications of my Anet A6 to an AM6 MGN Mod and some exams in my freetime, there is currently no possibilty to print and test the updates I recently made.
I will upload the new versions as soon as possible.
Till then you can use the current version with TMC2130 drivers if you install your fan outside the case.
Thanks for your understanding and patience :)

UPDATE 13.04.18:
Please wait till next week if you are using TMC stepper drivers with jumper wires (e.g. TMC2130)!
The case is too small for installing them plus a fan inside the case. The next update should be released next week after testing the new model.

UPDATE 26.02.18:
small fixes