February 25, 2018
Description
This holder is made for my acrylic paint collection. The Paint holes have a diameter of 22mm. The paint i use is called Amsterdam set 24 colors 20 ml tubes.
Update-1, 9-3-2018
The design is done (So far) I sorted them into three categories A, B & C. You decide witch one is best. 15% infill is enough.
D, Is for the Tool/Brush holders. You can just glue them on the back of the paint holder or keep them separate. 30% infill on these works best.
Update-2, 10-3-2018
I made a new extension version with dowels (E), so you can make it as you like.
E, Has hole's for dowels so you can extend it. I recommend a 100% infill for the dowels. You may have to sand the dowels a little bit for a perfect fit. I also recommend using a raft for the dowel. And the Acryl Brush Holder E V1, is 95 (mm) tall. Tool Holder E V1, 30% infill on these two works best.
Update-3, 11-3-2018
I just added Side Brush/Tool holders and a separate dowel for the sides. Also on the Brush/Tool Holders is a 30% infill enough.
The side dowels should only be used in combination with the side holders. Not with the paint holder.
License:
Creative Commons - Attribution
JorisNL
