Bernzomatic Mini Torch Handle ST500 and ST1000

Torch handle to hold a Bernzomatic mini-torch. This handle will fit the ST500, ST500CKC, and ST1000.

To assemble, you will need one 3mm hex nut one 3mm washer and one M3 x 35 socket head cap screw.

I received an ST500 as a gift. It does a fantastic job on heat shrink tubing and is exceptional for smoothing out prints. The heat shrink tip also removes the marks left behind when removing support material. It has a trigger igniter and a continuous flame lock that keeps it lit while in use.

There are two handles available, one plain and one tagged with Engineering Aesthetics. There is also a cap for the base so you can store the accessories in the handle.

Here are a few links to the torch, mine came from Home Depot.
https://www.homedepot.com/p/Bernzomatic-ST500T-Auto-Ignite-Butane-Torch-335258/205495608
https://www.bernzomatic.com/Products/Hand-Torches/Instant-On-Off/ST500
https://www.amazon.com/Bernzomatic-Micro-Torch-Solderng-Kit/dp/B0785S5985/ref=sr_1_9?s=hi&ie=UTF8&qid=1520472378&sr=1-9&keywords=micro+torch+bernzomatic