Classic Carved Vase

Classic Carved Vase

I printed this Vase in “Spiral Outer Contour Mode” ,0.2mm resolution, 0.4mm nozzle and 105% Flow Rate. Yes 5% more than normal. This was needed for my printer to fill all the gaps. Another important finding with this model: If I scale the size in Cura below 75% (min Z hight 236,5mm) in spiral outer contour mode, Cura will not make a good “slice”and the print will fail.

UPDATE MAY-16-2018

I made a correction of 0,5mm outwards of the carved section. Some users had problems slicing this model. The inside walls did sometimes hit each other, making the print fail.