March 11, 2018
Description
This time I've designed EASY TO PRINT wire dispenser! There are 2 versions:
We all got messy cables lying around and this is very nice solution! It's stackable (box is same size regarding of reel number) and very easy to print solution. Just print box and reels, than assemble the reels (I've glued them together) and just wind the cable on the reel. When you have all reels filled up, insert the rod from the side and that's it!
You can use 6mm plastic, wooden, aluminium, brass, steel rod, tube or stick INSTEAD of printing it. I used brass tubes I got laying around. It needs to be around 152mm in length.
There is also top plate inside, that can be printed and used if you got very dusty workplace.
*SILICON WIRES I RECOMMEND AVAILABLE WORLDWIDE (higher AWG = thinner wire): *
If you find my design useful, you can tip me with a $ or 2 :)
https://www.paypal.me/JureKorber
Have fun! =)
Jure Korber
License:
Creative Commons - Attribution - Non-Commercial - No Derivatives
JKSniper
