3D PRINT READY!! EsDeath from Akame ga Kill

IMPORTANT PLEASE READ BEFORE PRINTING
This print is ready to go and does not need any more fixing to be printed!

3D Print other models here:
https://www.thingiverse.com/Animu/designs

Join the Anime Figure group and share and print anime figures! As well as Updates on what im doing next https://www.thingiverse.com/groups/animefigures
Support me on Patreon! https://www.patreon.com/AnimuAnimu/posts

This print already has all the support material ready to go, DO NOT add SUPPORT MATERIAL.
the support material that i already added to the file has tapered ends and easily breaks off, however be very careful removing, especially around the head and hammer handle.
I STRONGLY RECOMMEND USING A CUTTING DEVICE like a dremel, or rotary tool to cut the supports on this model. unlike my other models, this needs beefy supports for the overhangs, but the model itself is very delicate. do not print this is if you are not willing to take the time to carefully remove the supports, and reprint if necessary.
Print with AT LEAST 30% infill and be careful removing supports, there are many fragile features.
DO NOT PRINT WITH A RAFT OR SUPPORT MATERIAL
Do not freak out of the supports fail mid print, they are mostly redundant and designed to recover.
A brim does help with bed adhesion though

there are TWO stl files included, PRINT THE 3DPrintReady FILE. I included files of the print without supports if you want to add your own supports. note a base is necessary or the model will tip over.

print this at .1mm layer height for optimal results.

i did a bunch of smoothing in Meshmixer, so the stl file is quite big even after being 'reduced' so be patient!